PipeFitAR
AR pipe layout for fitters. Aim the crosshair, drop a point at each centerline change, and get a cut list with fitting take-outs and weld gaps already subtracted. AR gets the shape; your tape gets the numbers.
Features
- Cut list. Cut = center-to-center minus fitting take-out minus weld gap, for every leg.
- Fittings. ASME butt-weld elbows 1/2"–12" NPS (45 LR, 90 LR or SR, cut 90s), tees, reducers, weld-neck and slip-on flanges, socket-weld and threaded take-outs.
- Honest accuracy. Tape tests calibrate your phone, and every cut shows its ±. Type the real tape length on any cut.
- Snap. Level, plumb and 45°, with a haptic tick.
- On the job. Walk-out steps, a shareable iso sketch, a material list from your stock and drops, and saved jobs that snap back into place.
Measurements are estimates. Verify every cut with a tape before cutting or welding.
Support
Questions, bugs, or a fitting you need added? Email support@unitus.dev or use the contact form. We usually reply within two business days.
Common fixes:
- Camera is black? Open Settings → PipeFitAR and turn on Camera.
- "Tracking limited" warning? Move the phone slowly and add light. The flashlight button helps in dark rooms. Matte surfaces track better than shiny pipe or glass.
- Lengths reading long or short? Run three or more tape tests (tap the ± button). Vary length and direction.
- Saved job won't snap back into place? Stand where you saved it and look around slowly. If the room has changed a lot, tap Skip: the cut list, walk-out and sketch still work.
Privacy & terms
PipeFitAR collects no data. Read the Privacy Policy and Terms of Use.